Exacq exacqVision Pro User Manual Manuel d'utilisateur télécharger pdf (Page 68)

www.exacq.com

6. Add an event to monitor. This works in a similar way as the Event Linking discussed in the “Event Linking” section

of this manual. Select an Event Type, and Event Source, an Action Type, and an Action Target. The options listed

in Event Source vary depending on which Event Type (such as triggers, serial ports, and serial profiles) is selected

and how it is configured. For more information, see the sections of Config (Setup) Page Overview chapter that

are related to the desired Event Type.

7. The Action Type list allows you to select an action that will occur when the selected Event Type occurs on the

selected Event Source. When you select an Action Type, a list of options is displayed in the Action Targets list.

Following are the available Action Type options and their associated Action Target options:

NOTE: The list of Action Types varies based on whether the profile is a Video Panel or View.

Action Type

Description

Action Target Options

Log (Video

Panel or View)

A notification of the event is

saved in the system log file.

None

Play Sound

(Video Panel or

View)

A sound is played.

A list of sounds.

Switch Video

(Video Panel)

Video from a camera is

displayed.

All cameras enabled on all connected systems (or on

the system selected from the drop-down list)

Digital Preset

(Video Panel)

A PTZ preset configured on a

camera is displayed.

All PTZ presets configured on all connected systems

(or on the system selected from the drop-down list)

Switch View

(View)

A single view is displayed until

a specific event occurs.

Any view configured on the client computer. The view

is automatically displayed when the event occurs.

Switch View

Tour (View)

A tour is displayed until a

specific event occurs.

Any tour configured on the client computer. The tour

is automatically displayed when the event occurs.

NOTE: With Event Monitoring, you can select Any as the Event Source if you do not want to create separate but

similar profiles for every source. If you select Any as the Event Source and Switch Video as the Action Type, the

Action Target list contains an Event Source option so that you can create an action on the same source

associated with the event.

8. If you selected Show Event Monitor List, three more options are activated:

 Timeout allows you to determine how long, in seconds, an event is shown in the Show Event Monitor

List. If you select 0, the event listing is displayed it until it is acknowledged.

 Confirm requires a confirmation before the event is removed from the list.

 Message is any general information that you want to display with the event, such as an action that a

guard should take when the event occurs.

9. Select a Priority level for the action. If different event types occur simultaneously, the event with the higher

priority level is displayed until it is acknowledged. Then events with lower priority are displayed. The highest

priority is 1, and the lowest priority is 10.

10. Click the Apply button when you have finished your profile.

You can now view your event profile in Live mode. A Video Panel profile can be displayed on the Live Page by right-

clicking a video window. A View profile can be displayed by selecting the Views button in the site tree. See the Live Page

Overview chapter for more information.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 133 134

Commentaires sur ces manuels

Pas de commentaire

Exacq exacqVision Pro User Manual Manuel d'utilisateur Page 68

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Exacq exacqVision Pro User Manual