Exacq exacqVision E-Series User Manual Manuel d'utilisateur télécharger pdf (Page 58)

www.exacq.com

Configuring the External Alarm Output

To trigger an external alarm output when an event occurs, open the Alarm Output Settings interface to set the related

parameters:

1. From the Remote Configuration menu, select Alarm Settings and then Alarm Output to open the Alarm Output

Settings interface.

2. Select one alarm output channel in the Alarm Output drop-down list.

3. Set the Delay time to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min, or Manual. The Delay refers to the time

duration that the alarm output remains in effect after alarm occurs. (If you choose Manual, you need to

manually disable the alarm output.)

4. Click Edit to enter the Edit Schedule Time interface. The time schedule configuration is the same as the Setting

of the Arming Schedule for Motion Detection.

5. Return to the Alarm Output Settings interface and click Save to save the settings.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 68 69

Pas de commentaire

Exacq exacqVision E-Series User Manual Manuel d'utilisateur Page 58