Exacq exacqVision Transacq Manuel d'utilisateur télécharger pdf

Using Transacq for IP Data Integration into exacqVision

www.exacq.com

Page 1 of 6

1/13/2015

Introduction

Transacq allows an exacqVision server (version 4.5 or newer) to receive, store, and display IP network-based textual data from

devices such as automated teller machines (ATM), bank terminals, point-of-sale devices, and any other devices that stream

unencrypted data over a LAN or WAN.

Requirements

 The receiving exacqVision server must be licensed as Enterprise, Professional, or an unexpired Trial license.

 Winpcap must be installed on Windows systems, and libpcap must be installed on Linux systems.

 Transacq must be running as Administrator for Windows or as Root for Linux.

 The sending device must transmit unencrypted clear text on an IP-based network.

 The Transacq server must have dual network interface cards (NICs), with one port reserved exclusively for receiving

mirrored, unfiltered text.

 The Transacq server must be connected to a network switch capable of mirroring the text traffic from the sending/receiving

device. If the Transacq server is connected to a switch that can mirror multiple ports, a single Transacq server can receive

text strings from multiple devices.

 An exacqVision server can be used to run Transacq.

Block Diagram for Centralized Transacq Data Acquisition

Note the following best practices from the configuration above:

 IP camera traffic is separated from IP serial data traffic, easing the processing burden on the Transacq server.

 A dedicated Transacq server enables the use of a single-NIC exacqVision server.

 If Transacq is loaded on a server with multiple NICs, the NICs must be teamed, or else they must be configured in different

subnets.

 The processing burden on the Transacq server is proportional to the amount of network traffic received. Thus, it is best to

locate the server in a network location that receives a minimum amount of extraneous network traffic.

1 2 3 4 5 6

Using Transacq for IP Data Integration into exacqVision www.exacq.com Page 1 of 6 1/13/2015 Introduction Transacq allows an exacqVision

www.exacq.com Page 2 of 6 1/13/2015 Functional Data Flow Diagram – Transacq on Separate Server Functional Data Flow Diagram – Transacq on

www.exacq.com Page 3 of 6 1/13/2015 Description of Operation 1. Unencrypted text flows from the corporate server through a network switch to

www.exacq.com Page 4 of 6 1/13/2015 Configuration 1. Configure the network switch to mirror the necessary traffic to the Transacq server: 

Page 5

www.exacq.com Page 5 of 6 1/13/2015 3. Modify the Transacq.xml file to include the IP addresses and port numbers. The location of this file v

www.exacq.com Page 6 of 6 1/13/2015 6. Configure one serial port per text device on the exacqVision server, as shown in the following figure.

Pas de commentaire

Exacq exacqVision Transacq Manuel d'utilisateur