Exacq exacqVision Edge/Axis Quick Start Guide Manuel d'utilisateur télécharger pdf

exacqVision Edge/Axis Quick Start Guide

www.exacq.com

Page 1 of 6

10/17/2014

Introduction

exacqVision Edge is a variation of the standard exacqVision Server application that operates on a compatible Axis camera. It can

record video from the local camera directly to the SD memory card in the camera or remote drives. The exacqVision Client

application can connect to any combination of Edge and standard servers simultaneously.

Requirements

 A one-channel license from Exacq Technologies must be obtained for each Edge-enabled camera. (A standard Edge license

part number is EDGE, and an Edge Plus license part number is EDGEP.)

 exacqVision Edge is compatible with Axis ACAP cameras:

 The camera must be running version 5.2 firmware or later (5.4 or later if remote storage drives are used).

 An SDHC class 10 or better SD memory card no larger than 32GB, purchased separately, is required for each camera.

NOTE: Up to 2GB is reserved for exacqVision Edge operations and cannot be used for exacqVision Edge data storage.

 A separate web server computer running the exacqVision Web Service application is required for mobile or web clients

connecting to Edge servers.

Block Diagram

1 2 3 4 5 6

exacqVision Edge/Axis Quick Start Guide www.exacq.com Page 1 of 6 10/17/2014 Introduction exacqVision Edge is a variation of the standar

www.exacq.com Page 2 of 6 10/17/2014 Installation and Configuration CAUTION: Do not record from an IP camera on more than one exacqVision ser

www.exacq.com Page 3 of 6 10/17/2014 11. Complete the following steps on the Application Packages page, as shown in the following illustratio

www.exacq.com Page 4 of 6 10/17/2014 13. Add the exacqVision camera license to the camera’s server on the System Setup page. When complete, t

www.exacq.com Page 5 of 6 10/17/2014 Using Network Storage exacqVision Edge can also save data to network attached storage (NAS) provided by t

www.exacq.com Page 6 of 6 10/17/2014 Troubleshooting If you encounter a write error, complete the following steps: 1. Stop the exacqVision E

Pas de commentaire

Exacq exacqVision Edge/Axis Quick Start Guide Manuel d'utilisateur